HP LaserJet P3010 Series - User Guide

Sleep delay
The adjustable sleep mode feature reduces power consumption when the product has been inactive for an
extended period. You can set the length of time before the product enters sleep mode. The default setting is
30 MINUTES.
NOTE: The product display dims when the product is in sleep mode. This mode does not aect product warm-
up time.
Set sleep delay
1. Press the Menu button .
2. Open each of the following menus. Press the down arrow to highlight it and then press the OK button to
select it.
a. CONFIGURE DEVICE
b. SYSTEM SETUP
c. SLEEP DELAY
3. Press the up or down arrow / to select the appropriate time period, and then press the OK button.
4. Press the Menu button .
Disable or enable sleep mode
1. Press the Menu button .
2. Open each of the following menus. Press the down arrow to highlight it and then press the OK button to
select it.
a. CONFIGURE DEVICE
b. RESETS
c. SLEEP MODE
3. Press the up arrow or down arrow / to select the ON or OFF setting, and then press the OK button.
4. Press the Menu button .
ENWW Economy settings 91