HP LaserJet P3010 Series - Software Technical Reference

Table Of Contents
Paper type (control panel) Paper type (printer driver) Tray 1 Tray 2 and
optional 500-
sheet tray
Automatic
duplex printing
LETTERHEAD Letterhead X X X
ENVELOPE Envelope X
PREPRINTED Preprinted X X X
PREPUNCHED Prepunched X X X
COLORED Colored X X X
ROUGH Rough X
NOTE: For a complete list of specific HP-brand paper that this product supports, go to www.hp.com/
sbso/product/supplies.
Custom paper sizes
The following table shows custom paper sizes that are available for the HP LaserJet P3010 Series
product.
Table 6-7 HP PCL 6 print driver custom paper sizes
Tray Dimensions Minimum Maximum
Tray 1 (100-sheet
multipurpose)
Width 98.4 mm (3.9 in) 216 mm (8.5 in)
Length 148 mm (5.8 in) 356 mm (14.0 in)
Tray 2 (250-sheet) Width 148 mm (5.83 in) 216 mm (8.5 in)
Length 210 mm (8.27 in) 297 mm (11.69 in)
Tray 3 (500-sheet) Width 148 mm (5.83 in) 216 mm (8.5 in)
Length 210 mm (8.27 in) 356 mm (14.0 in)
Paper-type commands
The PCL 5 print driver escape sequence for paper type is "Esc&n#Wdpapertype", where "n#" is the
number of characters in the paper type plus 1. For example, in the sequence "Esc&n6WdPlain", "Plain"
has 5 letters plus 1, for a total of 6.
Table 6-8 paper-type commands
Esc& n# Wd Paper type
Esc& 6 Wd Plain
Esc& 11 Wd Preprinted
Esc& 11 Wd Letterhead
Esc& 13 Wd Transparency
1
Esc& 11 Wd Prepunched
Esc& 7 Wd Labels
228 Chapter 6 Engineering Details ENWW
Engineering Details