HP LaserJet P3010 Series - Software Technical Reference

Print on both sides of the page (duplex printing)
Use automatic duplex printing
1. Insert enough paper into one of the trays to accommodate the print job. If you are loading special
paper such as letterhead, load it in one of the following ways:
●
For tray 1, load the letterhead paper face-up with the bottom edge feeding into the printer first.
●
For all other trays, load the letterhead paper face-down with the top edge at the back of the
tray.
2. On the File menu, click Print.
3. Open the Layout menu.
4. Next to Two-Sided, select either Long-Edge Binding or Short-Edge Binding.
5. Click Print.
Print on both sides manually
1. Insert enough paper into one of the trays to accommodate the print job. If you are loading special
paper such as letterhead, load it in one of the following ways:
●
For Tray 1, load the letterhead paper face-up with the top edge feeding into the printer first.
●
For all other trays, load the letterhead paper face-down with the top edge at the right of the
tray.
CAUTION: To avoid jams, do not load paper that is heavier than 105 g/m
2
(28-lb bond).
2. On the File menu, click Print.
3. On the Finishing menu, Click the Manual Duplex tab.
4. Click the check box next to Manual Duplex.
5. Click Print. Follow the instructions in the pop-up window that appears on the computer screen
before replacing the output stack in Tray 1 for printing the second half. Even pages are printed first.
NOTE: You can optionally print a guide with a print job that shows the correct way to insert the
stack into Tray 1.
6. Go to the printer, and remove any blank paper that is in Tray 1.
7. Insert the printed stack face-up with the top edge feeding into the printer first in Tray 1. You must
print the second side from Tray 1.
8. If prompted, press the appropriate control-panel button to continue.
Store jobs
You can store jobs on the product so you can print them at any time. You can share stored jobs with
other users, or you can make them private.
1. On the File menu, click Print.
2. Open the Job Storage menu.
ENWW Use features in the Macintosh printer driver 203
Macintosh