HP LaserJet P3010 Series - Software Technical Reference

Table Of Contents
Remove external fonts
1. In Windows Vista, click the Start button, click Control Panel, click Hardware and Sound, and
then click Printers.
In Windows XP and Windows Server 2003, click Start, click Settings, and then click Printers and
Faxes.
In Windows Server 2008, click Start, click Control Panel, and then open the Printers folder.
In Windows 2000 Service Pack 3, click Start, click Settings, and then click Printers.
2. Right-click the name of the product.
3. Click Properties.
4. Click the Device Settings tab.
5. Click the External Fonts option. The Properties button appears.
6. Click Properties. The HP Font Installer dialog box appears. The external fonts that are installed
appear in the Installed Font(s) window.
7. Select the fonts that you want to remove, and then click Remove. The fonts are removed.
8. Click OK to close the HP Font Installer dialog box.
Installable Options
Items under Installable Options are automatically populated and their defaults set when the driver is
installed.
The product has printing options that you can install and configure in this section. The following controls
are available:
Automatic Configuration
Printer Status Notification
Tray 3 and Tray 4
Duplex Unit (for 2-Sided Printing)
Allow Manual Duplexing
Printer Memory
Printer Hard Disk
Job Storage
Job Separator
Mopier Mode
Automatic Configuration
Use the Device Settings tab to tell the driver about the hardware configuration of the product. If
bidirectional communication is enabled in a supported environment, update this tab by selecting the
ENWW Device Settings tab features 161
HP PCL 6 Print Driver for
Windows