HP LaserJet P3010 Series - Software Technical Reference

The trays listed in Form to Tray Assignment include standard trays and optional accessory trays.
Generally, items that are installed separately have a separate Installable Options setting.
The input trays listed here are also listed as paper sources on the Paper/Quality tab.
Configuring the trays
1. Select the appropriate tray in the Form to Tray Assignment list.
2. Use the drop-down menu to select the paper size (or form) that is loaded in that tray.
3. Repeat steps 1 and 2 for the remaining trays.
4. Click OK to enable your settings, or, if necessary, click Cancel to reconfigure all the trays and
remove the size and type constraints that have been imposed on the Paper/Quality tab.
Font Substitution Table
Use Font Substitution Table to change the TrueType-to-product font mapping and to install and
remove external fonts for the product through the External Fonts option. External fonts can be soft fonts
or DIMM fonts.
Click Font Substitution Table to open a list of fonts, as shown in the following figure. Use the settings
to change the TrueType-to-product font mappings.
Figure 4-21 Font Substitution Table
External Fonts
Use External Fonts to install and remove external fonts for the product. External fonts can be soft fonts
or DIMM fonts.
ENWW Device Settings tab features 159
HP PCL 6 Print Driver for
Windows