HP LaserJet P3010 Series - Software Technical Reference

Device Settings tab features
NOTE: The Device Settings tab is in the Properties tab set. For information about how to gain access
to these tabs, see
Properties driver tabs on page 114.
Available options depend on the feature. The following figure shows the Device Settings tab.
Figure 4-20 Device Settings tab
The Device Settings tab contains controls for paper-handling devices and controls for managing the
product.
The Device Settings tab contains the following controls:
●
Form to Tray Assignment
●
Font Substitution Table
●
Installable Options
Form to Tray Assignment
A network administrator can use Form to Tray Assignment to specify the paper size in each input tray.
The product supports more than one source of paper. You can assign a form (which defines the paper
size and margins) to each paper source. When a form is matched to a source, you can select the form
when you print. The product prints from the tray to which that form is assigned.
Network administrators can use the Form to Tray Assignment setting to specify, in the driver, the paper
size that is loaded into each available input tray. The use of forms constrains the choices that are
available in the Paper-Size list on the Paper/Quality tab in the Printing Preferences driver tabs. This
constraint reduces the likelihood of tying up the product with paper-mount messages that occur when
users request sizes or types that are not available.
158 Chapter 4 HP PCL 6 Print Driver for Windows ENWW
HP PCL 6 Print Driver for
Windows