HP LaserJet P3010 Series - Software Technical Reference

Table Of Contents
4. Click the Device Settings tab.
5. Select Job Storage.
6. Select Disabled in the Change 'Job Storage' Setting dialog box that appears.
If the job-storage feature is enabled (without installing a hard disk but with at least 288 MB of total
memory), two Job Storage Mode settings are available on the Job Storage tab:
Proof and Hold
Personal Job
Two additional Job Storage Mode settings become available on the Job Storage tab if a hard disk is
installed:
Quick Copy
Stored Job
The following figure shows the Job Storage tab.
Figure 4-18 Job Storage tab
The Job Storage tab contains the following controls:
NOTE: Information about using the job-storage feature when printing is also provided here.
Status group box
150 Chapter 4 HP PCL 6 Print Driver for Windows ENWW
HP PCL 6 Print Driver for
Windows