HP LaserJet P3010 Series - Software Technical Reference

●
Bond
●
Recycled
●
Colored
●
Rough
NOTE: To make the Print on Both Sides (Manually) check box available in the document options,
select the Allow Manual Duplexing option on the Device Settings tab in the print-driver Properties
tab set. See
Installable Options on page 161.
If you want to print on both sides manually while using paper that is supported for automatic duplexing,
you must select and apply the Not Installed setting on the Allow manual duplexing option on the
Device Settings tab.
Cardstock paper can be manually printed on the second side, but no change occurs to the print mode.
Transparencies and labels should never be manually printed on the second side.
To print a multiple-page document, follow these steps:
1. Select the Print on Both Sides (Manually) check box.
2. Click OK. The even-number pages of the document print.
3. When the control panel shows the MANUALLY FEED message, insert the stack of paper (on which
the even-number pages have been printed) as indicated in the following figure.
Figure 4-15 Print on Both Sides Instructions dialog box
When you have completed the steps that appear in the dialog box, the second half of the print job prints
on the back side of the stack of paper. The driver does not require the program to specifically support
odd- and even-page printing, because the driver coordinates this function.
144 Chapter 4 HP PCL 6 Print Driver for Windows ENWW
HP PCL 6 Print Driver for
Windows