HP LaserJet P3010 Series - Software Technical Reference

NOTE: The Back Cover options are not available when the Booklet layout: setting is enabled on the
Finishing tab. The Back Cover setting is unavailable, because this page would be printed in the middle
of a booklet.
NOTE: The same size of paper will be used for the entire print job.
When you change the type and source of the paper and covers, the settings remain configured until you
quit the software program.
Print pages on different paper
Use the Print pages on different paper options to select an alternative paper type or source for the
first or last page of a document.
The following figure shows the Print pages on different paper settings and options.
Figure 4-10 Print pages on different paper–First or Last
The following are the Print pages on different paper options:
●
Pages in document: Select which pages are customized: the First page, the Last page, or
Pages: to select a range of pages or non-sequential, individual pages.
●
Paper source: This setting specifies the source tray to use for printing a document. The list of
source trays depends on the accessories that are installed. Any optional trays that are installed
through the Device Settings tab also appear here.
●
Paper type: This drop-down menu shows all of the paper types that the product supports.
NOTE: The same type of paper is used for the entire print job.
When you change the type and source of the paper and covers, the settings remain configured until you
close the software program.
132 Chapter 4 HP PCL 6 Print Driver for Windows ENWW
HP PCL 6 Print Driver for
Windows