HP LaserJet P3010 Series - Print tasks

HP LaserJet P3010 Series – Print tasks
© 2009 Copyright Hewlett-Packard
Development Company, L.P.
4
www.hp.com
Select output options
How do I? Steps to perform
Print to the top (standard) output bin
The top output bin collects paper face-down, in the
correct order. The top output bin should be used for most
print jobs, including transparencies.
To use the top output bin, be sure that the rear output bin
is closed. To avoid jams, do not open or close the rear
output bin while the product is printing.
1
Print to the rear output bin
The product always prints to the rear output bin if it is
open. Paper that is printed to this bin will exit faceup,
with the last page on top (reverse order).
Printing from Tray 1 to the rear output bin provides the
straightest path. Opening the rear output bin might
improve performance with the following items:
• Envelopes
• Labels
• Small custom-size paper
• Postcards
• Paper heavier than 120 g/m
2
(32 lb)
To open the rear output bin, grasp the handle at the top
of the bin. Pull the bin down to a 45° angle, and slide out
the extension.
Opening the rear output bin makes the duplexer and the
top output bin unavailable. To avoid jams, do not open or
close the rear output bin while the product is printing.