HP LaserJet Enterprise M4555 MFP - Software Installation Guide

Use the HP Embedded Web Server to configure E-mail
settings
NOTE: You can also use the HP Scan to Email Setup Wizard option on the CD to configure basic
E-mail settings. Use the HP Embedded Web Server to configure more advanced options.
NOTE: To find detailed information about using the HP Embedded Web Server, click the Help link
in the upper-right corner of each HP Embedded Web Server page.
1. Open a Web page, and type the IP address in the address line.
2. When the HP Embedded Web Server opens, click the Scan/Digital Send tab, and then click the
E-mail Setup link.
3. Select the E-mail check box to enable the feature.
4. Select the outgoing mail server to use, or click the Add button to add a different server to the list.
NOTE: If you don't know the name of the mail server, you can usually find it by opening your e-
mail program and looking at the outgoing mail configuration settings.
5. In the Address and Message Field Control area, configure the default setting for the From
address.
6. Configuring the other settings is optional.
7. When you are finished, click the Save Settings button.
ENWW Use the HP Embedded Web Server to configure E-mail settings 15