HP LaserJet Enterprise M4555 MFP - Software Installation Guide

Use the HP Embedded Web Server to enable digital
sending features
Some digital sending features are not available on the product control panel until you use the
HP Embedded Web Server to enable them.
NOTE: To find detailed information about using the HP Embedded Web Server, click the Help link
in the upper-right corner of each HP Embedded Web Server page.
1. Open a Web page, and type the IP address in the address line.
2. When the HP Embedded Web Server opens, click the Scan/Digital Send tab.
3. If you did not previously use the HP Scan to Email Setup Wizard to set up the E-mail feature,
you can enable it by using the HP Embedded Web Server.
a. Click the E-mail Setup link.
b. Select the Enable Send to E-mail check box.
c. Click the Apply button at the bottom of the page.
4. Enable the Save to Network Folder feature.
a. Click the Save to Network Folder Setup link.
b. Select the Save to Network Folder check box.
c. Click the Apply button at the bottom of the page.
5. Enable the Save To USB feature.
a. Click the Save to USB Setup link.
b. Select the Enable Save to USB check box.
c. Click the Apply button at the bottom of the page.
ENWW Use the HP Embedded Web Server to enable digital sending features 13