HP LaserJet Enterprise M4555 MFP Series - Software Technical Reference

Table 4-1 PCL 6 custom paper sizes (continued)
Tray Dimensions Minimum Maximum
Tray 3 (500-sheet) Width 148 mm (5.38 in) 216 mm (8.5 in)
Length 210 mm (8.27 in) 356 mm (14.0 in)
Tray 4 (500-sheet) Width 148 mm (5.38 in) 216 mm (8.5 in)
Length 210 mm (8.27 in) 356 mm (14.0 in)
Tray 5 (500-sheet) Width 148 mm (5.38 in) 216 mm (8.5 in)
Length 210 mm (8.27 in) 356 mm (14.0 in)
Paper source
The Paper source setting specifies the source tray to use for printing a document. The list of source
trays depends on the product accessories that are installed. Any optional source trays that are installed
through the Device Settings tab also appear here.
The Paper source drop-down menu can contain the following options, depending on what has been
installed on the product:
●
Automatically select
●
Printer Auto Select
●
Manual Feed in Tray 1
●
Tray 1 (100-sheet multipurpose tray)
●
Tray 2 (500-sheet tray)
●
Tray 3 (500-sheet paper tray; standard with F and FSKM models; optional on all other models)
●
Tray 4 (500-sheet paper tray; standard with FSKM models; optional on all other models).
●
Tray 5 (500-sheet paper tray; standard with FSKM models; optional on all other models).
The default setting is Automatically Select. When this setting is selected, the product uses the source
tray that supports the paper size that you have selected. If you select a source tray other than
Automatically select, make sure that the correct paper size is loaded in the source tray. For
information about paper sources, see
Paper attributes and commands on page 162.
Paper type
The Paper type drop-down menu shows the first few paper types that the HP LaserJet Enterprise
M4555 MFP Series supports and an entry for More. Clicking More opens the Type Is dialog box.
80 Chapter 4 HP PCL 6 printer driver for Windows ENWW