HP LaserJet Enterprise M4555 MFP Series - Software Technical Reference

When you disable mopier mode, you are not necessarily disabling multiple collated copies, which the
driver can still perform through the software rather than the product hardware (the mopying path that is
disabled when you change the Mopier Mode setting to Disabled). However, a multiple-copy print
job that is sent when the mopier is disabled loses the advantage of transmitting the print job once,
because the job is sent through the network for each collated copy.
Mopier mode and collation
Mopying and collating print jobs are independent but closely related functions. Mopying, the ability to
send original print jobs to the product, is performed by the printer driver. Collating can be controlled
by either the printer driver or the document software program. The mopying mode is selected by default
in the driver, and can be disabled by changing the Mopier Mode setting on the Device Settings
tab to Disabled.
Control collation through the printer driver by selecting or clearing the Collated check box on the
Advanced tab. Click Copy Count under the Paper Output setting. You can clear the check box,
which is available only when the Copy Count option is set to more than 1 copy, to allow the software
program to control collation.
To receive uncollated multiple copies of a print job, you must clear the Collated check box and make
sure that the software program collation feature is not selected.
The following table shows the relation between mopier mode settings and collation settings in the
software program and the driver. The first three columns show the settings; the last column, "Expected
result", shows how a 3-page print job would appear.
Table 4-4 Driver mopier mode and collation settings
Mopier mode Application collation Driver collation Expected result
Disabled Not selected Not selected 3 copies uncollated
Disabled Not selected Selected 3 copies uncollated
Disabled Selected Not selected 3 copies collated
Disabled Selected Selected 3 copies collated
Enabled Not selected Not selected 3 copies uncollated
Enabled Not selected Selected 3 copies uncollated
Enabled Selected Not selected 3 copies collated
Enabled Selected Selected 3 copies collated
Envelope Feeder
A 75-envelope tray is available for this product. The Envelope Feeder option contains the following
options:
●
Not Installed: This setting is the default setting. The product will not pull envelopes from an
installed envelope feeder if this setting is selected.
●
Installed: This setting enables the product to print envelopes from the installed envelope feeder.
ENWW
Device Settings tab features
119