HP LaserJet Enterprise M4555 MFP Series - Installation Guide






B
#
JKL
STUV
1
3
42
10
5
EN
Connect the power cord between the product and a grounded ac outlet. Turn on the product. On the control panel, set the language
and the date/time, if prompted. When the Home screen appears, touch
Initial Setup, and enable basic product functions.
Note: After you install the software, more advanced setup is available by entering the product IP address in the address bar of a Web
browser.
Caution: Make sure your power source is adequate for the product voltage rating. The voltage rating is on the product label. The
product uses either 100-127 Vac or 220-240 Vac and 50/60 Hz. To prevent damage to the product, use only the power cord that is
provided with the product.
HE
AC
IP
AC
127-100240-22060/50
HP LaserJet Information Engineering