HP Color LaserJet CP3525 Series Printers - User Guide

Manually configure IPv6 TCP/IP parameters from the control panel
In addition to using the embedded Web server, you can also use the control-panel menus to set an IPv6
address.
1.
Press the Menu button
.
2. Press the down arrow
to highlight the CONFIGURE DEVICE menu, and then press the OK
button.
3. Press the down arrow
to highlight the I/O menu, and then press the OK button.
4. Press the down arrow
to highlight the EMBEDDED JETDIRECT MENU option, and then press
the OK button.
5. Press the down arrow
to highlight the TCP/IP menu, and then press the OK button.
6. Press the down arrow
to highlight the IPV6 SETTINGS menu, and then press the OK button.
7. Press the down arrow
to highlight the ADDRESS menu, and then press the OK button.
8. Press the down arrow
to highlight the MANUAL SETTINGS menu, and then press the OK button.
9. Press the down arrow
to highlight the ENABLE setting, and then press the OK button.
10. Press the up arrow
to highlight the ON setting, and then press the OK button.
11. Press the down arrow
to highlight the ADDRESS menu, and then press the OK button.
12. Press the up arrow
or the down arrow to enter the address. Press the OK button.
NOTE: You must press the OK button after entering each character.
13.
Press the up arrow
or the down arrow to select the stop character . Press the OK button.
14.
Press the Menu button
to return to the Ready state.
72 Chapter 5 Connectivity ENWW