HP Color LaserJet CP3525 Series Printers - User Guide

3. Locate the thumb screws on the formatter board in the rear of the product.
4. Unscrew the thumb screws and then pull the formatter board from the product. Place the formatter
board on a clean, flat, grounded surface.
5. To replace a DIMM that is currently installed, spread the latches apart on each side of the DIMM
slot, lift the DIMM up at an angle, and pull it out.
XOXO
XO
XO
XO
XO
XOXOXOXOXOXO
XO
XOXOXOXO
XO
XOXO
XO
XO
XOXOXO
XO
XO
XO
XOXO
XOXO
XO
XOXO
XO
XO
XO
XOXO
XOXOXO
XOXO
XO
XOXOXO
XO
XO
XO
XO
XOXO
XOXO
XO
XOXOXO
XO
XOXO
XOXOXO
XOXO
XO
XO
XOXO
XOXOXO
XOXOXO
XO
XO
XO
XO
XO
XO
XO
XO
XOXO
6. Remove the new DIMM from the antistatic package. Locate the alignment notch on the bottom
edge of the DIMM.
150 Chapter 10 Manage and maintain the product ENWW