HP Color LaserJet CP3525 Series Printers - Software Technical Reference

Type Specifications Quantity Driver settings Paper
orientation
Transparencies
Minimum 0.102 mm
Minimum 0.102
mm (.004 in) thick
Maximum stack
height:
56 mm (2.2 in)
Transparencies Side to be printed
on facing up
Glossy paper Range:
96 g/m
2
(26 lb)
bond to 220 g/m
2
(59 lb) bond
56 mm (2.2 in) Light glossy,
glossy, or heavy
glossy
Side to be printed
on facing up
Tray 3 capacity: 56 mm (2.2 in) height or 500 sheets of paper, whichever is less. Supported paper
types include: labels, transparencies, glossy paper, glossy film, photo paper, and tough paper. Basis
Weight: 60-220 g/m
2
(16-59 lb).
NOTE: For a complete list of specific HP-brand paper that this product supports, go to www.hp.com/
sbso/product/supplies.
Custom paper sizes
The following table shows custom paper sizes that are available for the HP Color LaserJet CP3525
Series product.
Table 7-10 HP PCL 6 print driver custom paper sizes
Tray Dimensions Minimum Maximum
Tray 1 (100-sheet
multipurpose)
Width 98.4 mm (3.9 in) 216 mm (8.5 in)
Length 148 mm (5.8 in) 356 mm (14.0 in)
Tray 2 (250-sheet) Width 148 mm (5.83 in) 216 mm (8.5 in)
Length 210 mm (8.27 in) 297 mm (11.69 in)
Trays 3 (500-sheet) Width 148 mm (5.83 in) 216 mm (8.5 in)
Length 210 mm (8.27 in) 356 mm (14.0 in)
Paper-type commands
The PCL 5 print driver escape sequence for paper type is "Esc&n#Wdpapertype", where "n#" is the
number of characters in the paper type plus 1. For example, in the sequence "Esc&n6WdPlain", "Plain"
has 5 letters plus 1, for a total of 6.
Table 7-11 paper-type commands
Esc& n# Wd Paper type
Esc& 6 Wd Plain
Esc& 11 Wd Preprinted
Esc& 11 Wd Letterhead
Esc& 13 Wd Transparency
1
Table 7-9 Tray 3 paper information (continued)
ENWW Media attributes 299