HP Color LaserJet CP3525 Series Printers - Software Technical Reference

Add Euro Currency Symbol to PostScript Fonts
This control specifies whether to add the Euro symbol to the printer fonts. The following settings are
available:
●
Yes. This is the default setting.
●
No
Job Timeout
This control specifies how long the product will try to process the postscript document before the product
stops trying to print the document. If you specify 0 seconds, the product continues trying to process
indefinitely. The default setting is 0 seconds. You can use the spin box to change this value from 1 to
a maximum of 32,767 seconds.
Wait Timeout
This control specifies how long the product waits to get more postscript information from the computer.
After the specified time passes, the product stops trying to print the document and prints an error
message. If you are trying to print a very complicated document, you might want to increase this value.
If you specify 0 seconds, the product waits indefinitely. The default setting is 300 seconds. You can
use the spin box to change this value to a maximum of 32,767 seconds.
Minimum Font Size to Download as Outline
This control specifies the minimum font size (in pixels) for which the driver downloads TrueType fonts
as outline (Type 1) fonts. A font smaller than the minimum setting is downloaded as a bitmap (Type 3)
font. Use this option to fine-tune the Automatic setting for the TrueType Font Download option on the
Advanced tab in Document Defaults. The default setting is 100 pixels. You can use the spin box to
change this value from 0 to a maximum of 32,767 pixels.
Maximum Font Size to Download as Outline
This control specifies the maximum font size (in pixels) for which the driver will download TrueType fonts
as bitmap (Type 3) fonts. A font larger than the maximum setting will be downloaded as an outline (Type
1) font. Use this option to fine-tune the Automatic setting or override the Send TrueType as Bitmap
setting for the TrueType Font Download option on the Advanced tab in Document Defaults. The
default setting is 600 pixels. You can use the spin box to change this value from 0 to a maximum of
32,767 pixels.
Installable Options
Items under Installable Options are automatically populated and their defaults set when the driver is
installed.
The HP Color LaserJet CP3525 Series product has printing options that you can install and configure
in this section. The following controls are available:
●
Postscript Passthrough – PS Universal Print Driver only
●
JPEG Passthrough – PS Universal Print Driver only
●
Mopier Mode
●
Automatic Configuration
ENWW Device Settings tab features 239