HP Color LaserJet CP3525 Series Printers - Software Technical Reference

Output Protocol
This control specifies the protocol that the product uses for print jobs. The following options are available:
●
ASCII (default)
●
TBCP
●
Binary
When you click ASCII, data is sent in ASCII format (7-bit), which might take longer to print but can be
sent through any I/O channel, such as a serial, parallel, or network port.
When you click TBCP (Tagged Binary Communications Protocol), all data except special control
characters is sent in binary (8-bit) format. The binary formats can be sent over parallel or serial
communications ports and are faster than sending data in ASCII format.
When you click Binary, all data except special control characters is sent in binary (8-bit) format. The
binary formats can be sent over parallel or serial communications ports and are faster than sending data
in ASCII format.
Send Ctrl-D Before Each Job
This control specifies whether the product will be reset at the beginning of every postscript document.
The default setting is No. Pressing Ctrl-D resets the product to its default setting to ensure that previous
print jobs do not affect the current print job. Using Ctrl-D might cause a print job to fail if the product is
connected through a network. If your document fails to print when sent to a product connected through
parallel or serial ports, change No to Yes.
Send Ctrl-D After Each Job
This control specifies whether the product will be reset at the end of every postscript document. The
default setting is Yes. Pressing Ctrl-D resets the product to its default setting to ensure that future print
jobs are not affected by the current print job. Using Ctrl-D might cause a print job to fail if the product is
connected through a network. If your document fails to print when sent to a network product, change
Yes to No.
Convert Gray Text to PostScript Gray
This control specifies whether to convert the true gray value (RGB) in text to the gray provided by the
HP PS Universal Print Driver. The following settings are available:
●
Yes
●
No. This is the default setting.
Convert Gray Graphics to PostScript Gray
This control specifies whether to convert the true gray value (RGB) in graphics to the gray provided by
the HP PS Universal Print Driver. The following settings are available:
●
Yes
●
No. This is the default setting.
238 Chapter 5 HP Universal Print Drivers for Windows — PS and PCL 5 ENWW