HP Color LaserJet CM1312 MFP Series - Software Technical Reference

Control Description/Option
●
Rough paper.
●
Less transfer/More transfer (-5, -4, -3, -2, -1, +1, +2, +3, +4, +5). See Less
transfer/More transfer (-5, -4, -3, -2, -1, +1, +2, +3, +4, +5) in the Transfer control
row.
Toner The following settings are available for the Toner control:
●
No adjustment.
●
Dry paper. See Dry paper in the Transfer control row.
●
Humid paper. See Humid paper in the Transfer control row.
●
Rough paper.
●
Less transfer/More transfer (-5, -4, -3, -2, -1, +1, +2, +3, +4, +5). See Less
transfer/More transfer (-5, -4, -3, -2, -1, +1, +2, +3, +4, +5) in the Transfer control
row.
At the bottom of the Print Modes section, check the Restore modes box, and then click Apply to restore
the product's print modes to the original factory defaults.
The Optimize section of the Extended Print Modes screen contains settings are applied to all paper
printed, depending on the engine’s internal tables. The following controls are available:
●
Background toner
●
Extra drum cleaning
●
Drum banding
●
Transfer belt cleaning
●
Transfer belt cleaning voltage
●
Transfer belt – Y
●
Transfer belt – M
●
Transfer belt – C
●
Transfer belt – K
Click Apply to make the changes take effect.
If you do not want to save changes made to the print mode settings, click Refresh.
Table 2-5 Print Modes section controls (continued)
68 Chapter 2 Software description ENWW