HP Color LaserJet CM1312 MFP Series - Software Technical Reference

Paper Size
Change the width and height values by typing numeric strings into the edit boxes in the Paper Size
group box.
Any entry that is greater than the maximum limits of the width and height edit box is rounded down to
the maximum valid entry, while any entry that is smaller than the minimum limits of the width and height
edit box is rounded up to the minimum valid entry.
If units are in millimeters, the custom paper-size range minimum is the limit rounded up to the nearest
whole millimeter. The custom paper-size range maximum is the limit rounded down to the nearest whole
millimeter. Any non-numerical entry reverts to the last valid entry. Width and height entries are validated
when the focus has changed.
The resolution of each edit box is 1 millimeter or 1/10 of an inch, depending on the current measurement
units.
Units
To change measurement units, click one of the options in the Units group box (either Inches or
Millimeters).
Custom width and height control limits
The minimum media size for the HP Color LaserJet CM1312 MFP Series printer is 76.2 mm x 127 mm
(3 x 5 inches) and the maximum is 215.9 x 355.6 mm (8.5 x 14 inches). The following table summarizes
media size limits.
The following table identifies the media types the HP Color LaserJet CM1312 MFP Series printer
supports in trays 1 and 2.
Table 6-5 Tray 1 and Tray 2 Specifications
Tray 1 and Tray 2
Dimensions
1
Weight
Capacity
2
Paper Minimum: 76 x 127 mm
(3 x 5 inches)
60 to 163 g/m
2
(16 to 43 lb)
Up to 176 g/m
2
(47 lb) for
postcards
Single sheet of 75 g/m
2
(20 lb)
paper for Tray 1
Up to 250 sheets for Tray 2
Maximum: 216 x 356 mm
(8.5 x 14 inches)
256 Chapter 6 Engineering Details ENWW