HP Color LaserJet CM1312 MFP Series - Software Technical Reference

The following figure shows the Covers setting and options.
Figure 4-7 Paper/Quality tab – Special pages – Covers
The following are the Covers options:
●
Cover type. Select which cover is customized: Front, Back, or Both
●
Paper source. The Paper Source setting specifies the source tray to use for adding a front cover
and/or a back cover to the document.
●
Paper type. The Paper Type setting specifies the paper size to use for front covers and/or back
covers. Changes made to the Paper Type setting here override any previous Paper Type settings
that use the same paper source.
NOTE: The Back Cover options are not available when the Booklet Printing Layout setting is
enabled on the Finishing tab. The back cover setting is unavailable, because this page would be printed
in the middle of a booklet.
NOTE: The same size of paper will be used for the entire print job.
When you change the type and source of the paper and covers, the settings remain configured until you
quit the software program.
Print pages on different paper
Use the Print pages on different paper options to select an alternative paper type or source for the
first or last page of a document.
176 Chapter 4 HP PCL 6 and universal printer-drivers for Windows ENWW