HP Color LaserJet CM1312 MFP Series - Software Technical Reference

The name that appears in the Name text box depends on the following conditions:
●
If a saved custom paper size has been selected from the drop-down menu on the Paper/Quality
tab, the Name text box appears the name of the selected custom paper size.
●
If a standard paper size has been selected on the Paper/Quality tab, the Name text box appears
the default name of "Custom."
●
If a new name has been typed into the Name text box for the purpose of saving a new paper size
or renaming an existing paper size, then that new name will remain in the text box until the new
size is saved or until the dialog box is closed.
If you type a new name into the Name text box but then do not click Save, you can change the width
and height values without losing the name. However, if you close the dialog box without clicking Save,
any unsaved name or size values are lost without warning.
Paper Size
Change the width and height values by typing numeric strings into the edit boxes in the Paper Size
group box.
Any entry that is greater than the maximum limits of the width and height edit box is rounded down to
the maximum valid entry, while any entry that is smaller than the minimum limits of the width and height
edit box is rounded up to the minimum valid entry.
If units are in millimeters, the custom paper-size range minimum is the limit that is rounded up to the
nearest whole millimeter. The custom paper-size range maximum is the limit rounded down to the
nearest whole millimeter. Any non-numerical entry reverts to the last valid entry. Width and height entries
are validated when the focus has changed.
The resolution of each edit box is 1 millimeter or 1/10 of an inch, depending on the current measurement
units.
Units
To change measurement units, click one of the options in the Units group box (either Inches or
Millimeters).
Custom width and height control limits
The minimum paper size for the product is 76.2 x 127 mm (3 x 5 inches), and the maximum paper size
is 215.9 x 355.6 mm (8.5 x 14 inches). The following table summarizes paper-size limits.
Table 4-1 HP Color LaserJet CM1312 MFP Series product - HP PCL 6 custom paper sizes
Tray Dimensions Minimum Maximum
Tray 1(150-sheet) Width 148.0 mm (5.83 inches) 215.9 mm (8.5 inches)
Height 210.0 mm (8.26 inches) 355.6 mm (14.0 inches)
Paper source:
The Paper source: setting specifies the source tray to use for printing a document. The list of source
trays depends on the product accessories that are installed. Any optional source trays that are installed
through the Device Settings tab also appear here.
172 Chapter 4 HP PCL 6 and universal printer-drivers for Windows ENWW