HP Color LaserJet CM1312 MFP Series - Software Technical Reference

Enable SNMP v1 read-write access
Select this option to enable SNMP v1 agents on the product. Custom community
names can be configured to control management access to the product. These
community name settings appear on the lower half of the screen.
Set Community name:
Type the SNMP Set Community name
(password) to allow SNMP information to
be configured (or written) on the product.
Confirm Set Community name: Retype the SNMP Set Community name
(password) to allow SNMP information to
be configured (or written) on the product.
Get Community name: Type the SNMP Get Community Name
(password) to allow SNMP information to
be read from the product.
Confirm Get Community name: Retype the SNMP Get Community Name
(password) to allow SNMP information to
be read from the product.
Disable SNMP v1 default Get
Community name of “public”
Select this option to disable the default
Get community name "public." After
selecting this option, type the values in
the Get Community name and Confirm
Get Community name fields.
Enable SNMP v1 read-only access
(uses “public” for the Get Community
value)
Select this option to enable the SNMP v1 agents on the product but limit access to
read-only. Write-access is disabled. The default Get Community name "public" is
automatically enabled.
Get Community name:
Type the SNMP Set Community name
(password) to allow SNMP information to
be configured (or written) on the product.
Configure Get Community name:
Disable SNMP v1 default Get
Community name of “public:”
Select this option to disable the default
Get community name "public". After
selecting this option, type the values in
the Get Community name field and in
the Confirm Get Community name
fields.
Disable SNMP v1 Select this option to disable the SNMP v1 agents on the product, which is
recommended for secure environments. If SNMP v1 is disabled, some port monitors
or discovery utilities might not operate properly.
Apply Click Apply to make the changes take effect.
NOTE: Changing SNMP settings can cause a loss of communication and functionality.
Other screens
The following table lists screens that are also available through HP ToolboxFX.
Screen Access
About HP ToolboxFX screen Click the HP logo that appears in the upper-left corner of the
HP ToolboxFX screens.
HP Instant Support screen Click the HP Instant Support link in the Other Links box that
appears on all HP ToolboxFX and HP EWS screens.
84 Chapter 2 Software description ENWW