HP Color LaserJet CM1312 MFP - Scan Tasks

HP LaserJet CM1312 MFP Series – Scan

Development Company, L.P.

www.hp.com

Make my scan look better

How do I? Steps to perform

Clean the scanner glass

1 Turn off the product, unplug the power cord from the

electrical socket, and raise the lid.

CAUTION: Do not use abrasives, acetone, benzene,

ammonia, ethyl alcohol, or carbon tetrachloride on any

part of the product; these can damage the product. Do not

place liquids directly on the glass. They might seep under

it and damage the product.

2 Clean the glass by using a soft cloth or sponge that

has been moistened with nonabrasive glass cleaner.

NOTE: If streaks or other defects appear only on copies

produced using the automatic document feeder (ADF),

clean the scanner strip (step 3). It is not necessary to

clean the scanner glass.

3 Clean the scanner strip by using a soft cloth or sponge

that has been moistened with nonabrasive glass

cleaner.

4 To prevent spotting, dry the glass by using a chamois

or cellulose sponge.