HP Color LaserJet CM1312 MFP - Scan Tasks

ManualsBrandsHP ManualsAll in One PrinterCC431A

HP LaserJet CM1312 MFP Series – Scan

Development Company, L.P.

www.hp.com

Select scan properties

How do I? Steps to perform

Scanning from the product control panel is only

supported with a full software installation. HP ToolboxFX

must be running to scan by using the Start Scan button.

Scan from the product

Scan directly from the product by using the control-panel

scan buttons. Press Start Scan to scan to a folder

(Windows only) or to scan to e-mail.

Set up the product Scan To button

1 Click Start, click Programs (or All Programs in

Windows XP), click HP, click the product, click Scan,

and then click Settings.

2 Select Change the destinations that show up on

the all-in-one control panel.

3 The product is pre-configured with the following three

destinations in the dialog box.

○ Scan a document and attach it to an e-mail

○ Scan a photo and attach it to an e-mail

○ Scan a photo and save it as a file

4 Highlight a destination and click the arrow to move to

the destinations currently on the dialog box. Repeat

for all three destinations.

5 Click Update.

Summary of content (5 pages)

PAGE 1
HP LaserJet CM1312 MFP Series – Scan Select scan properties How do I? Scan from the product Steps to perform Scanning from the product control panel is only supported with a full software installation. HP ToolboxFX must be running to scan by using the Start Scan button. ? Scan directly from the product by using the control-panel scan buttons. Press Start Scan to scan to a folder (Windows only) or to scan to e-mail.
PAGE 2
HP LaserJet CM1312 MFP Series – Scan Send my scan to a folder How do I? Steps to perform Scan to a file, e-mail, or software program 1 Load the originals that are to be scanned face-up in the automatic document feeder (ADF) input tray, with the top of the document forward, and adjust the media guides. NOTE: To use this feature in Windows, a destination must be programmed in the scan setup before scanning to a destination.
PAGE 3
HP LaserJet CM1312 MFP Series – Scan How do I? Steps to perform 3 Use the arrow buttons to select a file destination. Scan to a file, e-mail, or software program (continued) Folder name ? 4 Press Start Scan or OK to scan the document to a file. ? 2 © 2008 Copyright Hewlett-Packard Development Company, L.P. www.hp.
PAGE 4
HP LaserJet CM1312 MFP Series – Scan Make my scan look better How do I? Steps to perform Clean the scanner glass 1 Turn off the product, unplug the power cord from the electrical socket, and raise the lid. CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on any part of the product; these can damage the product. Do not place liquids directly on the glass. They might seep under it and damage the product.
PAGE 5
HP LaserJet CM1312 MFP Series – Scan Scan from the PC How do I? Steps to perform 1 In the HP program group, select Scan to start HP LaserJet Scan. Scan from the PC NOTE: Pressing Start Scan on the product control panel also starts HP LaserJet Scan. ? 2 Choose the action that you want to accomplish. • Select a destination to begin scanning immediately. • Select Scan after prompting me for settings to specify additional settings before you begin scanning.