HP Color LaserJet CM1312 MFP - Copy Tasks

HP LaserJet CM1312 MFP Series – Copy

Development Company, L.P.

www.hp.com

Copy on preprinted letterhead or forms

How do I? Steps to perform

Load originals

Automatic document feeder (ADF models

only)

1 Insert the top-end of the stack of originals into the

ADF input tray, with the media stack face-up and

the first page to be copied on top of the stack.

If the media is longer than letter- or A4-sized

paper, pull out the ADF input tray extension to

support the media.

2 Slide the stack into the ADF until it does not move

any farther.

Document loaded appears on the control-panel

display.

3 Adjust the media guides until they are snug

against the media without restricting movement.

Flatbed scanner

1 Make sure that the automatic document feeder

(ADF) contains no media.

2 Lift the flatbed scanner cover.

NOTE: The maximum media size for flatbed scanning

is letter. Use the ADF for scanning media larger than

letter.

3 Place the original document face-down on the

flatbed scanner with the upper-left corner of the

document at the corner indicated by the icon on

the scanner.

4 Gently close the lid.

Document loaded