HP Color LaserJet Enterprise CM4540 MFP - Software Technical Reference

Table 4-1 PCL 6 custom paper sizes
Tray Dimensions Minimum Maximum
Tray 1 (100-sheet
multipurpose)
Width 76.2 mm (3.0 in) 216 mm (8.5 in)
Length 148 mm (5.83 in) 356 mm (14.0 in)
Tray 2 (250-sheet) Width 148.0 mm (5.83 in) 216 mm (8.5 in)
Length 210.0 mm (8.27 in) 356 mm (14.0 in)
Tray 3 (500-sheet) Width 148 mm (5.38 in) 216 mm (8.5 in)
Length 210 mm (8.27 in) 356 mm (14.0 in)
Tray 4 (500-sheet) Width 148 mm (5.38 in) 216 mm (8.5 in)
Length 210 mm (8.27 in) 356 mm (14.0 in)
Tray 5 (500-sheet) Width 148 mm (5.38 in) 216 mm (8.5 in)
Length 210 mm (8.27 in) 356 mm (14.0 in)
Paper source
The Paper source setting specifies the source tray to use for printing a document. The list of source
trays depends on the product accessories that are installed. Any optional source trays that are installed
through the Device Settings tab also appear here.
The Paper source drop-down menu can contain the following options, depending on what has been
installed on the product:
●
Automatically select
●
Printer Auto Select
●
Manual Feed in Tray 1
●
Tray 1 (100-sheet multipurpose tray)
●
Tray 2 (250-sheet tray)
●
Tray 3 (500-sheet paper tray)
●
Tray 4 (CM4540 MFPfskm only; optional on all other HP Color LaserJet Enterprise CM4540 MFP
Series models).
●
Tray 5 (CM4540 MFPfskm only; optional on all other HP Color LaserJet Enterprise CM4540 MFP
Series models).
The default setting is Automatically Select. When this setting is selected, the HP Color LaserJet
Enterprise CM4540 MFP Series uses the source tray that supports the paper size that you have
selected. If you select a source tray other than Automatically select, make sure that the correct
paper size is loaded in the source tray. For information about paper sources, see
Media attributes and
commands on page 174 .
78 Chapter 4 HP PCL 6 print driver for Windows ENWW