HP Color LaserJet Enterprise CM4540 MFP - Software Technical Reference

6. The product's network settings (IP Address and Host name) are displayed. Click the Next

button to continue to the Contacting Device screen.

Figure 3-21 Scan Setup Wizard–Welcome screen

7. The computer communicates with the product, and then you continue to the Add or Remove

Folders screen.

NOTE: If the Scan to Desktop has been disabled in the EWS error message appears,

open the HP EWS, click the Device Settings tab, click the Send to Folder menu item, and

then select both the Enable Send to Folder and the Enable Scan Setup Wizard check

boxes. You might also need to close and reopen the Scan Setup Wizard.

To gain access to the HP EWS, perform the following:

a. Make note of the TCP/IP address of the product on the Embedded Jetdirect Page. The

Embedded Jetdirect Page is the second page of the configuration page printout.

To print a configuration page from the product control panel, perform the following:

i. Touch Administration.

ii. Touch Information.

iii. Touch Configuration/Status Pages.

iv. Touch Configuration Page.

v. Touch Print.

ENWW

Create a network folder by using the Scan Setup Wizard