HP Color LaserJet CM4540 Multifunction Printer Series-User Guide

電信（傳真）產品的附加聲明
歐盟電信作業聲明
本產品能夠連接至歐洲經濟區域 (EEA) 國家/地區中的類比公共交換電訊網路 (PSTN)。
它符合 EUR&TTE Directive 1999/5/EC (Annex II) 並貼有適用的 CE 相容性標章。
如需詳細資訊，請參閱本手冊其他章節中由廠商所發佈的相容性宣告。
由於各別國家/地區 PSTN 之間的差異，無法絕對保證產品能在每個 PSTN 終端點順利操作。網路相容
性牽涉到客戶針對 PSTN 連線所選擇的正確設定值。請按照使用手冊中的指示進行。
如果您遭遇網路相容性問題，請洽詢您國家/地區的供應商或惠普科技服務中心。
連接至 PSTN 終端點可能包含了需由當地 PSTN 業者進行設定的額外需求。
New Zealand Telecom Statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has
accepted that the item complies with minimum conditions for connection to its network. It
indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty.
Above all, it provides no assurance that any item wi
l
l work correctly in all respects with another
item of Telepermitted equipment of a different make or model, nor does it imply that any product
is compatible with all of Telecom’s network services.
This equipment may not provide for the effective hand-over of a call to another device connected
to the same line.
Thi
s equipment shall not be set up to make automatic calls to the Telecom “111” Emergency
Service.
This product has not been tested to ensure compatibility with the FaxAbility distinctive ring service
for New Zealand.
Additional FCC statement for telecom products (US)
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
ACTA. On the back of this equipment is a label that contains, among other information, a
product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided
to the telephone company.
The REN is used to de
termine the quantity of de
vices, which may be connected to the telephone
line. Excessive RENs on the telephone line may result in the devices not ringing in response to
an incoming call. In most, but not all, areas, the sum of the RENs should not exceed five (5.0).
To be certain of the nu
mber of
devices that may be connected to the line, as determined by the
total RENs, contact the telephone company to determine the maximum REN for the calling area.
This equipment uses the following USOC jacks: RJ11C.
An FCC-compliant telephone cord and modular plug is provided with this equipment. This
equipment is designed to be co
nnected to the telephone network or premises wiring using a
compatible modular jack, which is Part 68 compliant. This equipment cannot be used on
344
附錄 D 法規資訊
ZHTW