HP LaserJet M9040/M9050 MFP - User Guide

Table Of Contents
Electrical specifications
WARNING! Power requirements are based on the country/region where the device is sold. Do not
convert operating voltages. This can damage the device and void the product warranty.
Table C-3 Power requirements
Specification 110-volt models 220-volt models
Power requirements 100 to 127 Vac
50/60 Hz
220 to 240 Vac
50/60 Hz
Rated current 12 Amps 5.3 Amps
Table C-4 Power consumption (average, in watts)
1
Model Printing
2
Copying
2
Ready or
standby
,
4
Sleep 1
3
,
5
Sleep 2 Off
HP LaserJet M9040 MFP 1070 W 1120 W 305 W 221 W 59 W 0.9 W
HP LaserJet M9050 MFP 1130 W 1160 W 305 W 221 W 59 W 0.9 W
1
Values are based on preliminary data. See www.hp.com/go/ljm9040mfp/regulatory or www.hp.com/go/ljm9050mfp/
regulatory for current information.
2
Power numbers are the highest values measured using all standard voltages.
3
Default time from Ready mode to Sleep 1 = 15 minutes, and to Sleep 2 = 90 minutes (HP LaserJet M9050 MFP) , 60 minutes
(HP LaserJet M9040 MDP).
4
Heat dissipation in Ready mode = 1045 BTU/hour (HP LaserJet M9050 MFP), 1045 BTU/hour (HP LaserJet M9040 MFP).
5
Recovery time from Sleep to start of printing = 20 seconds, and from Sleep 2 to start of printing = 145 seconds.
ENWW Electrical specifications 251