HP LaserJet M9040/M9050 MFP - Software Technical Reference (external)

Tray Dimensions Minimum Maximum
HP 3000–Sheet Stapler/
Stacker
1
Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210 mm (8.27 inches) 432 mm (17 inches)
HP Multifunction Finisher
1
Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210.0 mm (8.27 inches) 432 mm (17 inches)
8–bin Mailbox
1
Width 216 mm (8.5 inches) 211 mm (8.3 inches)
Height 279 mm (11.0 inches) 297 mm (11.7 inches)
1
An accessory output device (HP 3000-Sheet Stacker, HP 3000-Sheet Stapler/Stacker, HP Multifunction Finisher, or 8–bin
Mailbox) is required for the HP LaserJet M9040 MFP and HP LaserJet M9050 MFP.
Media-type commands
The HP PCL 5 driver escape sequence for paper type is "Esc&n#Wdpapertype", where "n#" is the
number of characters in the paper type plus 1. For example, in the sequence "Esc&n6WdPlain", "Plain"
has 5 letters plus 1, for a total of 6.
Table 6-9 Media-type commands
Esc& n# Wd Paper type
Esc& 6 Wd Plain
Esc& 11 Wd Preprinted
Esc& 11 Wd Letterhead
Esc& 13 Wd Transparency
Esc& 11 Wd Prepunched
Esc& 7 Wd Labels
Esc& 5 Wd Bond
Esc& 9 Wd Recycled
Esc& 6 Wd Color
Esc& 6 Wd
Light <75 g/m
2
Esc& 6 Wd Heavy
Esc& 11 Wd
Cardstock > 163 g/m
21
Esc& 6 Wd Rough
Esc& 9 Wd Envelope
1
The correct command for cardstock is "Esc&n11WdCard Stock", with a space between the "d" and the "S", and with an
uppercase "S".
Table 6-8 Custom media sizes (continued)
268 Chapter 6 Engineering details ENWW