HP LaserJet M9040/M9050 MFP - Software Technical Reference (external)

Media types
(command string)
Tray 1 /
face-up
output
Trays 2, 3 (500-
sheet)
Tray 4 (2000–
sheet)
Duplexing unit Accessory output
bins / face down
output
Preprinted Y Y Y Y Y
Transparency Y N N N N
Prepunched Y Y Y Y Y
Labels Y N N N N
Bond Y Y Y Y Y
Recycled Y Y Y Y Y
Color Y Y Y Y Y
Cardstock Y Y Y Y Y
Rough Y N N N N
Envelope Y N N N N
CustomYYYYY
Custom paper sizes
This product supports a variety of custom paper sizes. Supported custom sizes are sizes that are within
the minimum- and maximum-size guidelines for the product but are not listed in the supported paper
sizes table. When using a supported custom size, specify the custom size in the printer driver, and load
the paper in a tray that supports custom sizes.
Minimum media dimensions are 98 x 191 mm (3.8 x 7.5 inches).
Maximum media dimensions are 312 x 470 mm (12.3 x 18.5 inches).
The following table shows custom paper sizes that are available for the HP LaserJet M9040 MFP and
HP LaserJet M9050 MFP.
Table 6-8 Custom media sizes
Tray Dimensions Minimum Maximum
Tray 1 (100-sheet
multipurpose)
Width 98 mm (3.86 inches) 312 mm (12.28 inches)
Height 190 mm (7.5 inches) 470 mm (18.5 inches)
Tray 2, 3 (500-sheet) Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210 mm (8.27 inches) 432 mm (17 inches)
Tray 4 (2000-sheet) Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210 mm (8.27 inches) 432 mm (17 inches)
Duplex unit Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210 mm (8.27 inches) 432 mm (17 inches)
HP 3000–Sheet Stacker
1
Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210 mm (8.27 inches) 432 mm (17 inches)
Table 6-7 Supported input media types (continued)
ENWW Media attributes and commands 267
Engineering details