HP LaserJet M9040/M9050 MFP - Software Technical Reference (external)

10. If the product has a tray 1, select the Tray 1 check box.
11. If the product has a tray 4, select the 2000–Sheet Input Tray (Tray 4) check box.
12. If the product has a duplex unit, select the Duplex Unit check box.
13. If the product has a hard disk, select the Hard Disk option from the Printer Disk menu.
14. For the Accessory Output Bins menu, select one of the following:
●
Not Installed
●
HP 3000-Sheet Stacker
●
HP 3000-Sheet Stapler/Stacker
●
HP Multifunction Finisher
●
8–bin Mailbox
If you select the 8–bin Mailbox option from the Accessory Output Bins menu, the Mailbox
Mode menu appears. Select one of the following:
●
Printer's Current Setting
●
Stacker Mode
●
Job Separator Mode
●
Sorter/Collator Mode
●
Mailbox Mode
15. For the Total Printer Memory drop-down menu, select one of the following:
●
96 – 127 MB
●
128 – 255 MB
●
256 – 383 MB
●
384 – 512 MB
16. Click the Apply Changes button, and then close the Printer List dialog box.
206 Chapter 5 Macintosh software and utilities ENWW