HP LaserJet M9040/M9050 MFP - Software Technical Reference (external)

To print a configuration page from the product control panel, perform the following:
i. Touch Administration.
ii. Touch Information.
iii. Touch Configuration/Status Pages.
iv. Touch Configuration Page.
v. Touch Print.
NOTE: If the product contains an HP Jetdirect EIO print server or an optional hard disk drive,
additional configuration pages print that provide information about those options.
d. On the first configuration page, under the IPv4 heading, find the IP Address. Type this address
into the Address field on the add printer screen.
e. The information in the Name, Location, and Print Using fields will automatically be
populated. If the product PPD does not appear in the Print Using field, turn the computer off
and then on, and the restart the setup process.
6. Click the Add button. The Installable Options screen appears.
Figure 5-16 Installable Options screen
ENWW Macintosh install and uninstall instructions 197
Macintosh software and
utilities