HP LaserJet M9040/M9050 MFP - Software Technical Reference (external)

NOTE: If the product contains an HP Jetdirect EIO print server or an optional hard disk drive,
additional configuration pages print that provide information about those options.
NOTE: If the product does not appear in the list, verify that the product is on and connected
to the network, then try turning the product off and then on. If the product PPD does not appear
in the Print Using pull-down list, turn the computer off and then on, and then restart the setup
process. For more troubleshooting information, see
Troubleshooting the product setup
on page 207.
If you are using the IP Printing method, carry out the following steps:
a. Click the IP Printer tab.
Figure 5-15 Printer Browser — IP Printer tab
b. Choose the HP Jet Direct – Socket option from the Protocol pull-down menu. This is the
recommended setting for HP products.
c. Print the configuration page.
196 Chapter 5 Macintosh software and utilities ENWW