HP LaserJet M9040/M9050 MFP - Software Technical Reference (external)

Add Euro Currency Symbol to PostScript Fonts
This control specifies whether to add the Euro symbol to the product fonts. The following settings are
available:
●
Yes (This is the default setting.)
●
No
Job Timeout
This control specifies how long the document can take to get from the computer to the product before
the product stops trying to print the document. If you specify 0 seconds, the product continues trying
to print indefinitely. The default setting is 0 seconds. Use the spin box to change this value, up to a
maximum of 32767 seconds.
Wait Timeout
This control specifies how long the product waits to get more postscript information from the computer.
After the specified time passes, the product stops trying to print the document and prints an error
message. When printing a very complicated document, increase this value. If you specify 0 seconds,
the product waits indefinitely. The default setting is 300 seconds. Use the spin box to change this value,
up to a maximum of 32767 seconds.
Minimum Font Size to Download as Outline
This control specifies the minimum font size (in pixels) for which the driver downloads TrueType fonts
as outline (Type 1) fonts. Any font smaller than the minimum setting is downloaded as a bitmap (Type
3) font. Use this option to fine-tune the Automatic setting for the TrueType Font Download option on
the Advanced tab in Printing Preferences printer driver tabs. The default setting is 100 pixel(s). Use
the spin box to change this value, up to a maximum of 32767 pixel(s).
Maximum Font Size to Download as Outline
This control specifies the maximum font size (in pixels) for which the driver will download TrueType fonts
as bitmap (Type 3) fonts. Any font larger than the maximum setting will be downloaded as an outline
(Type 1) font. Use this option to fine-tune the Automatic setting or override the Bitmap setting for the
TrueType Font Download option on the Advanced tab in Printing Preferences printer driver tabs.
The default setting is 600 pixel(s). Use the spin box to change this value, up to a maximum of 32767
pixel(s).
Installable Options
Automatic Configuration
Use the Device Settings tab to tell the driver about the hardware configuration of the product. If
bidirectional communication is enabled in a supported environment, set up this tab by selecting the
Update Now setting in the Automatic Configuration setting. The default setting is Off.
NOTE: While the computer is communicating with the product, the Update Now option remains in the
Automatic Configuration drop-down menu. When this communication process has completed, the
option in the Automatic Configuration drop-down list will return to the Off option.
If the computer environment does not support bidirectional communication, the Automatic
Configuration setting is unavailable, the options on this tab must be manually configured.
172 Chapter 4 HP PCL 5, PCL 6, and PS emulation drivers for Windows ENWW