HP LaserJet M9040/M9050 MFP - Software Technical Reference (external)

Figure 4-22 Job Storage tab
Status group box
The unlabeled group box on the Job Storage tab contains a status message about the destination of
a print job. The status information changes depending on the selections that are made on the Job
Storage tab.
Job Storage Mode
Use the Job Storage Mode options to store documents at the product and then control their printing at
the product control panel.
Off
When selected, this option turns the job-storage feature off (it is disabled), which means that the print
job will not be stored in the product.
Proof and Hold
When selected, this option stores the print job in memory and prints only the first copy of the job, allowing
you to check the first copy. If the document prints correctly, print the remaining copies of the print job at
the product control panel. Set the number of proof-and-hold print jobs that can be stored in the product
at the control panel.
After it is released for printing, the proof-and-hold job is immediately deleted from the product. If more
copies are needed, reprint the job from the software program. Sending a second proof-and-hold job that
160 Chapter 4 HP PCL 5, PCL 6, and PS emulation drivers for Windows ENWW