HP LaserJet M9040/M9050 MFP - Software Technical Reference (external)

Output Bin Options
Select an output destination from the Bin drop-down list in the Output Bin Options group box to
determine where the print job should exit the accessory output device. Several options are available.
NOTE: When you select the Upper Left Bin (Straightest Path) output bin option, pages exit the
accessory output device in the order in which the are printed. This might result in the document not
being in the correct order. All other output bin options print the document face down in the correct order.
HP 3000-Sheet Stacker or HP 3000-Sheet Stapler/Stacker
●
Automatically Select (default)
●
Upper Left Bin (Straightest Path)
●
Lower Left Bin (Highest Capacity)
HP Multifunction Finisher
●
Automatically Select (default)
●
Upper Left Bin
●
Upper Left Bin (Straightest Path)
8–bin Mailbox – Stacker Mode, Job Separator Mode, or Sorter/Collator Mode
●
Automatically Select (default)
●
Upper Left Bin (Straightest Path)
●
Output Bin 2–8
8–bin Mailbox – Mailbox Mode
●
Automatically Select (default)
●
Upper Left Bin (Straightest Path)
●
Output Bin 2
●
Output Bin 3
●
Output Bin 4
●
Output Bin 5
●
Output Bin 6
●
Output Bin 7
●
Output Bin 8
ENWW Output tab features 157
HP PCL 5, PCL 6, and PS
emulation drivers for
Windows