HP LaserJet M9040/M9050 MFP - Software Technical Reference (external)

Output tab features
NOTE: Disabling Mopier Mode disrupts functionality for the Output and Finishing tab features.
NOTE: If the Job Separator setting on the Device Settings tab is changed to the Disabled option,
the Job Separator button will not appear on the Output tab.
Use the Output tab to select where and how the media exits the accessory output device, as well as to
add job separator pages to a document.
Figure 4-20 Output tab
NOTE: The appearance of the Output tab will vary based on the installed accessory output device.
The Output tab appears among the driver tabs only if an accessory output device (HP 3000-Sheet
Stacker, HP 3000-Sheet Stapler/Stacker, HP Multifunction Finisher, or 8–bin Mailbox) is installed.
ENWW Output tab features 155
HP PCL 5, PCL 6, and PS
emulation drivers for
Windows