HP LaserJet M9040/M9050 MFP - Job Aid - Manage and Maintain - Load Paper

HP LaserJet M9040/M9050 MFP Series – Manage and Maintain
© 2008 Copyright Hewlett-Packard
Development Company, L.P.
5
www.hp.com
How do I? Steps to perform
Load undetectable standard-size paper in trays 2,
3, and 4 (continued)
NOTE: When loading tray 4, make sure that the paper guide
lock is in the up position.
6 Adjust the front paper guide by pressing the tab
on the guide and slide the guide until it gently
touches the paper.
7 Set the Custom/Standard switch to Custom.
8 Close the tray. The MFP control panel might
show the tray media type and size. If the
configuration is not correct, touch Modify on the
control panel. If the configuration is correct, touch
OK.
Load custom media in trays 2, 3, and 4
CAUTION: To avoid a jam, never add or remove paper from a
tray while printing from that tray.
1 Open the tray until it stops.