HP LaserJet M9040/M9050 MFP Embedded Web Server - User Guide

HP Jetdirect Security Configuration Wizard
Use the HP Jetdirect Security Configuration Wizard to configure security settings for HP Jetdirect
print server management.
HP Web Jetadmin is a powerful web-based software utility for installing, configuring, and managing
network-connected devices. Since it can install and configure devices, it must be able to secure itself
against unwanted access. Not only can it secure itself against unwanted users, it can also secure the
devices it manages against unwanted access. Securing devices is important for the following reasons:
●
Reduce printer down time
●
Reduce help desk calls
●
Minimize troubleshooting visits
●
Minimize consumable usage
NOTE: If you use HP Web Jetadmin to configure your printer, HP recommends that you configure HP
Jetdirect security settings with HP Web Jetadmin.
As HP Jetdirect firmware is enhanced or revised, performance and security issues are addressed.
Always keep the firmware on the printer at the latest revision level to ensure maximum security. HP Web
Jetadmin provides the ability to upgrade HP Jetdirect firmware either individually or in batches
The following illustration describes how to use this screen.
Figure 5-2 HP Jetdirect Security Configuration Wizard
ENWW HP Jetdirect Security Configuration Wizard 83