Start from here

www.hp.com/support
HP Deskjet F4100 All-in-One series • 7
Pemecahan masalah
Masalah: (Khusus Windows) Anda tidak melihat layar perintah yang
memberitahukan kapan harus memasang kabel USB.
Tindakan: Tutup semua layar. Keluarkan, kemudian masukkan kembali
CD HP All-in-One Windows. Lihat Langkah 14.
Masalah: (Khusus Windows) Layar Device Setup Has Failed To Complete
[Pengaturan Perangkat Gagal Diselesaikan] muncul.
Tindakan: Lepaskan kabel perangkat, kemudian pasang kembali. Periksa
semua sambungan. Pastikan kabel USB sudah terpasang ke komputer.
Jangan pasang kabel USB ke keyboard atau hub USB yang tidak
memiliki daya. Lihat Langkah 14.
การแก้ไขปัญหาเบื้องต้น
ปัญหา: (เฉพาะระบบ Windows เท่านั้น) ท่านไม่เห็นหน้าจอที่ให้ท่านเชื่อม
ต่อสาย USB
วิธีแก้ไข: ยกเลิกหน้าจอทั้งหมด นำ CD สีเขียว HP All-in-One Windows
ออกแล้วใส่กลับเข้าไปอีกครั้ง โปรดอ่านขั้นตอนที่ 14
ปัญหา: (เฉพาะ Windows เท่านั้น) หน้าจอ Device Setup Has Failed To
Complete (การตั้งค่าอุปกรณ์ไม่เสร็จสมบูรณ์) ปรากฏขึ้น
วิธีแก้ไข: ดึงปลั๊กเครื่องออกแล้วเสียบเข้าไปใหม่ ตรวจสอบการเชื่อมต่อทั้ง
หมด ตรวจสอบว่าได้ต่อสาย USB เข้ากับคอมพิวเตอร์แล้ว ห้ามต่อสาย USB
เข้ากับแป้นพิมพ์หรือฮับที่ไม่มีไฟอยู่ โปรดอ่านขั้นตอนที่ 14
Troubleshooting
Problem: (Windows only) You did not see the screen prompting you to
connect the USB cable.
Action: Cancel all screens. Remove and then re-insert the green
HP All-in-One Windows CD. Refer to Step 14.
Problem: (Windows only) The Device Setup Has Failed To Complete
screen displays.
Action: Unplug the device and plug it in again. Check all connections.
Make sure the USB cable is plugged into the computer. Do not plug the
USB cable into a keyboard or a non-powered USB hub. Refer to Step 14.