Safety data sheet

MATERIAL SAFETY DATA SHEET
First aid procedures
Eye contact Do not rub eyes. Immediately flush with large amounts of clean, warm water (low pressure)
for at least 15 minutes or until particles are removed. If irritation persists, consult a physician.
.
4. First Aid Measures
space
Skin contact Wash affected areas thoroughly with mild soap and water. Get medical attention if irritation
develops or persists.
space
Inhalation Move person to fresh air immediately. If irritation persists, consult a physician.
space
Ingestion Rinse mouth out with water. Drink one to two glasses of water. If symptoms occur, consult a
physician.
space
Flash point and method Not applicable
.
5. Fire Fighting Measures
space
Hazardous combustion
products
Carbon monoxide and carbon dioxide.
space
Flammable properties Like most organic material in powder form, toner can form explosive dust-air mixtures when
finely dispersed in air.
space
Extinguishing media
Suitable extinguishing
media
CO2, water, or dry chemical
space
Unsuitable extinguishing
media
None known.
space
Unusual fire and explosion
hazard
Like most organic material in powder form, toner can form explosive dust-air mixtures when
finely dispersed in air.
space
Protection of firefighters
Protective equipment
and precautions for
firefighters
If fire occurs in the printer, treat as an electrical fire.
space
Special firefighting
procedures
None established.
space
Personal precautions Minimize dust generation and accumulation.
.
6. Accidental Release Measures
space
Environmental precautions Do not flush into surface water or sanitary sewer system. See also section 13 Disposal
considerations.
space
Other information Slowly vacuum or sweep the material into a bag or other sealed container. Clean remainder
with a damp cloth or vacuum cleaner. If a vacuum is used, the motor must be rated as dust
explosion-proof. Fine powder can form explosive dust-air mixtures. Dispose of in compliance
with federal, state, and local regulations.
space
Handling Keep out of the reach of children. Avoid inhalation of dust and contact with skin and eyes. Use
with adequate ventilation. Keep away from excessive heat, sparks, and open flames.
.
7. Handling and Storage
space
Storage Keep out of the reach of children. Keep tightly closed and dry. Store away from strong
oxidizers. Store at room temperature.
space
Material name
Creation date
CB543A
Dec 18, 2007
Version number
2
MSDS US
2 / 6