HP LaserJet M2727 MFP - Software Technical Reference
The four options provided for controlling print quality are resolution, Resolution Enhancement
technology (REt), print density, and Economode.
●
Resolution. Select 600 resolution for average print jobs and FastRes 1200 for higher-quality print
jobs. Select ProRes 1200 for the highest-quality print job, but a longer printing time.
●
REt. You can turn on REt, which HP provides for improved print quality
●
Print Density. For increased print density, select a higher number. For decreased print density,
select a lower number.
●
Economode. Turn Economode on when you are printing average print jobs. Economode is a
feature that allows the product to use less toner per page. Selecting this option might extend the
life of the toner supply and might reduce cost per page. However, it will also reduce print quality.
The printed image is lighter, but it is adequate for printing drafts or proofs. HP does not recommend
full-time use of Economode. If Economode is used full-time, it is possible that the toner supply will
outlast the mechanical parts in the print cartridge. If print quality begins to degrade under these
circumstances, you will need to install a new print cartridge, even if there is toner supply remaining
in the cartridge.
Figure 2-33 Print Quality screen
The following table shows the options and settings for the Print Quality screen.
70 Chapter 2 Software description ENWW