HP LaserJet M2727 MFP - Software Technical Reference

Install and uninstall Macintosh printing-system software
components
●
Installation options
●
Detailed Macintosh installation instructions
●
HP LaserJet MFP uninstall instructions for Macintosh
●
Remove software from Macintosh operating systems
The printing-system software for the product comes on a single CD. On Macintosh operating systems,
the HP Installer installs the printing-system software from the CD onto the hard disk.
On Macintosh operating systems, the HP product uses the HP Installer. By default, the HP product
software folder and the Readiris folder are installed in the Applications folder.
Installation options
The printing-system software can be used with the product in the following configurations:
●
A computer is directly connected to the product through a USB port and the printing-system
software is loaded on the computer. This configuration provides the most product functionality.
●
The product is connected to a network and the printing-system software is loaded on a computer
that has access to the network.
General Macintosh installation instructions for direct connections
NOTE: Do not connect the USB cable until prompted during the printing-system software installation.
Use the following instructions to install the printing-system software on a Macintosh computer running
Mac OS X.
1. Follow the instructions in the Detailed Macintosh installation instructions section.
2. If prompted to do so, enter a user name and password that have administrator privileges.
3. The software license appears. Click Continue.
4. The software license agreement screen appears. Click Agree. The installation begins. During the
installation, you might be prompted again to provide a user name and password that have
administrator privileges.
5. When the installation is complete, the HP Setup Assistant starts automatically. Follow the onscreen
instructions.
NOTE: If the HP Setup Assistant does not start automatically, click System, click
Applications, click HP LaserJet MFP, and then double-click HP Setup Assistant.app.
General Macintosh installation instructions for networked computers
Use the following instructions to install the printing-system software on networked Macintosh operating
systems:
1. Connect the product to the network.
2. Follow the instructions in the Detailed Macintosh installation instructions section.
ENWW Install and uninstall Macintosh printing-system software components 299
Macintosh