HP LaserJet M2727 MFP - Software Technical Reference

Convert Gray Graphics to PostScript Gray
This option specifies whether to convert the true gray value (RGB) in graphics to the gray provided by
the printer driver. The following settings are available:
●
No (default)
●
Yes
Add Euro Currency Symbol to PostScript Fonts
This option specifies whether to add the Euro symbol to the device fonts. The following settings are
available:
●
Yes (default)
●
No
Job Timeout
This option specifies how long the document can take to get from the computer to the product before
the product stops trying to print the document. If you specify 0 seconds, the product continues trying
to print indefinitely. The default setting is 0 seconds. Use the spin box to change this value, up to a
maximum of 32,767 seconds.
Wait Timeout
This option specifies how long the product waits to get more postscript information from the computer.
After the specified time passes, the product stops trying to print the document and prints an error
message. When printing a very complicated document, increase this value. If you specify 0 seconds,
the product waits indefinitely. The default setting is 300 seconds. Use the spin box to change this value,
up to a maximum of 32,767 seconds.
Minimum Font Size to Download as Outline
This option specifies the minimum font size (in pixels) for which the printer driver downloads TrueType
fonts as outline (Type 1) fonts. Any font smaller than the minimum setting is downloaded as a bitmap
(Type 3) font. Use this option to fine-tune the Automatic setting for the TrueType Font Download
option on the Advanced tab in Document Defaults. The default setting is 100 pixel(s). Use the spin
box to change this value, up to a maximum of 32,767 pixels.
Maximum Font Size to Download as Bitmap
This option specifies the maximum font size (in pixels) for which the printer driver will download TrueType
fonts as bitmap (Type 3) fonts. Any font larger than the maximum setting will be downloaded as an
outline (Type 1) font. Use this option to fine-tune the Automatic setting or override the Send TrueType
as Bitmap setting for the TrueType Font Download option on the Advanced tab in Document
Defaults. The default setting is 600 pixel(s). Use the spin box to change this value, up to a maximum
of 32,767 pixels.
Installable Options
●
Tray 3
●
Duplex Unit (for 2-Sided Printing)
●
Allow Manual Duplexing
ENWW HP PCL 6 and HP postscript level 3 emulation printer drivers for Windows 281
HP printer drivers for
Windows