HP LaserJet M2727 MFP - Software Technical Reference

Resizing Options
The Resizing Options group box contains the following options:
●
Actual size (default)
●
Print document on setting
●
Scale to fit option
●
% of actual size setting
Actual size
Actual size is the default setting. It prints the document without changing the document size.
Print document on
Select the Print document on option to format the document for one paper size and then print the
document on a different paper size, with or without scaling the image to fit the new paper size.
The Print document on option is disabled by either of the following conditions:
●
The % of actual size value is not 100.
●
The Pages per sheet value on the Finishing tab is not 1.
When Print document on is selected, the drop-down menu shows the paper sizes on which you can
print. The list contains all of the standard paper sizes that the selected paper source supports and any
custom sizes that have been created. When Print document on is selected, Scale to fit is automatically
selected. Clear this check box if you do not want the document reduced or enlarged to fit on the selected
paper.
Scale to fit
The Scale to fit option specifies whether each formatted document page image is scaled to fit the target
paper size. By default, Scale to fit is selected when Print document on is selected. If the setting is
turned off, then the document page images will not be scaled, and are instead centered at full size on
the paper. If the document size is larger than the paper size, then the document image is clipped. If it
is smaller, then it is centered within the paper.
When the size for which the document is formatted (that is, the logical size) differs from the target size,
the preview image uses a dashed gray line to show the boundaries of the logical page in relation to the
target page size.
% of actual size
The % of actual size option provides a slider bar to use for scaling the percentage setting. The default
setting in the entry box is 100% of normal size. Normal size is defined as the paper size that is selected
within the printer driver or what the printer driver receives from the software program, if the software
program does not negotiate the paper size with the printer driver. The printer driver scales the page by
the appropriate factor and sends it to the product.
The limits of the range are from 25% to 400%, and any values outside the range are adjusted to those
limits as soon as the focus is removed from the control (that is, when the Tab key is pressed or another
control is selected).
Any change to the scale also changes the document preview image, which increases or decreases from
the upper-left corner of the preview.
ENWW HP PCL 6 and HP postscript level 3 emulation printer drivers for Windows 261
HP printer drivers for
Windows