HP LaserJet M2727 MFP - Software Technical Reference

The name that appears in the Name text box depends on the following conditions:
●
If a saved custom paper size has been selected from the drop-down menu on the Paper/Quality
tab, then the Name text box shows the name of the selected custom paper size.
●
If a standard paper size has been selected on the Paper/Quality tab, then the Name text box
shows the default name of "Custom."
●
If a new name has been typed into the Name text box for the purpose of saving a new size or
renaming an existing size, then that new name will remain in the text box until the new size is saved
or the dialog box is closed.
If you type a new name into the Name text box, but do not click Save, you can change the width and
height values without losing the name. However, if you close the dialog box without clicking Save, any
unsaved name or size values are lost without warning.
Custom paper sizes
Change the width and height values by typing numeric strings into the Width and Height fields in the
Custom Paper Size dialog box.
Any entry that is greater than the maximum limits of the width and height controls is rounded down to
the maximum valid entry, while any entry that is smaller than the minimum limits of the width and height
control is rounded up to the minimum valid entry.
If units are in millimeters, the custom paper-size range minimum is the limit rounded up to the nearest
whole millimeter. The custom paper-size range maximum is the limit rounded down to the nearest whole
millimeter. Any non-numerical entry reverts to the last valid entry. Width and height entries are validated
when the focus has changed.
The resolution of each control is 1 millimeter or 1/10 of an inch, depending on the current measurement
units.
Units
To change measurement units, click one of the options in the Units group box, either Inches or
Millimeters.
Custom width and height control limits
The minimum paper size for the product is 76.2 x 127 mm (3 x 5 inches) and the maximum size is 215.9
x 355.6 mm (8.5 x 14 inches). The following table summarizes paper size limits for each paper-handling
option.
Table 4-1 HP PCL6 printer driver custom paper sizes
Tray Dimensions Minimum Maximum
Tray 1 Width 76 mm (3.0 inches) 215 mm (8.5 inches)
Height 127 mm (5.0 inches) 356 mm (14.0 inches)
Tray 2 Width 148.0 mm (5.83 inches) 215 mm (8.5 inches)
Height 210 mm (8.26 inches) 356 mm (14.0 inches)
Tray 3 (optional, standard on
the HP LaserJet M2727nfs)
Width 148.0 mm (5.83 inches) 215 mm (8.5 inches)
Height 210 mm (8.26 inches) 356 mm (14.0 inches)
ENWW HP PCL 6 and HP postscript level 3 emulation printer drivers for Windows 255
HP printer drivers for
Windows